Take the 2-minute tour ×
Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. It's 100% free, no registration required.

I am planning on using the flexible faucet feed lines for a project I am working on. (they have a metallic outside and I suspect vinyl or plastic interior)

The temperature of the fluid that I will be running though it (maple sap) will be around 100F to 180F - but I don't know yet. I am building a preheater out of copper tube and need a way to connect two parts that are fixed but must be able to disconnect

I don't want the part to fail or break down and I do not want the material to leach into the fluid.

Are these feed lines acceptable for temps to 180F?

Is there another alternative that allows flexibility and easy connect/disconnect on one side of the part?

share|improve this question
2  
I think you are reaching an upper limit with 180F. I think those pipes are rated to 215F. but to be honest i am not sure if its a good idea to use those for food stuffs. –  ppumkin Aug 15 '11 at 10:05
    
OK, thanks. I made a preheater for maple sap (for making maple syrup) Copper pipe sits in a hood over a pan of boiling sap. Steam rises, condenses on the copper and transfers heat. The sap runs through the pipe and I need flexible connections on two parts - also ones that would be able to be taken off and on with ease. Thanks for the comment. –  Tim Aug 15 '11 at 14:12
add comment

1 Answer 1

The tubing should have a stamp on the side that says what temperature range it can handle.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.