Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

Besides closing it very slowly, any good tricks / gadgets that will slow down the door so it doesn't close with a thud?

share|improve this question
They make soft close hinges for cabinets, but I don't think they make these for a large entry doors (yet). – Tester101 Jul 9 '11 at 16:13

There are a few things you can do:

  • Check the hinges and use a level to see that the door is square. A heavy door hung incorrectly can slam heavily. Check this guide at national contractors for how to level a door. Some tips from it: check that the hinges are tight, not too heavily greased, and the same distance from the frame.

  • Install a closer arm (can be expensive)

Door closer

  • If the door isn't closing too hard, but makes a fair amount of noise, try putting some small felt pads on the inside of the jamb to soften the closure.

Felt pads

share|improve this answer

You could also install from 2-> several dampers like these ones depending how heavy the door is or how well you want to dampen it - for example you have a heavy draft that SLAMS the door shut several will be recomeneded to adsorb the doors speed. These work well if installed fairly well.

enter image description here

Either into the frame somehow- slighlty countersinking it so it hides nicely, or not- its up to you and your skills. enter image description here

Or just using a provided housing the will mount flush onto the frame of your door in any position that is best for you.

enter image description here

share|improve this answer
I found the dampers for cabinet doors, but not for a room door. I am looking for options for the bathroom door / bedroom doors. They make a decent amount of noise while closing manually. – Toofan Jul 12 '11 at 23:11
yea- those are the ones-- just use 3 top - center bottom or something that suits your needs. it would be best to have them inserted in the frame- looks better. – ppumkin Jul 13 '11 at 7:56

An other couple of possible hardware solutions to look into (exact size & weight of the door will determine if they are appropriate or not)...

Cheaper end of the market, Chain Spring Door Closer:

Chain Spring Door Closer

High end of the market, Concealed (Automatic) Door Closer:

Concealed (Automatic) Door Closer

share|improve this answer

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.