I've inherited an old washer (GE WJSR2080). It works fine, except that the spin cycle only works when the washer load size is set to the higher settings. When set to the small setting, it sounds like it's trying to spin but cannot. My hunch is that this isn't an out-of-balance issue (the small loads I've tried seem well balanced), but I'm willing to accept that it could be related.
Any thoughts on what could cause this?
I'd obviously like to keep using this as long as possible so if there's something I can do to prolong the life of the machine, that would be great. Also, it'd be nice to not waste water.