Sign up ×
Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. It's 100% free, no registration required.

I'd like to put some kind of easily removed clear (or semi-translucent) material on my large windows so I can use them as a dry-erase surface without blocking out the light. Any suggestions on what to look for? Cheaper is better : )

Window with writing on it Another window with writing

share|improve this question

4 Answers 4

up vote 11 down vote accepted

You can write on glass with a dry-erase marker and it will come off with a paper towel. (Try it yourself if you don't believe me!) I've never left it on glass long enough for it to need any sort of solvent to remove, but I'd think that normal ammonia-based window cleaner would work OK; if not, you could always use dry-erase cleaner as a last resort.

The reason this works is that dry-erase boards (the rigid kind at least) have a thin ceramic coating to prevent the ink from penetrating pores in the white plastic substrate, and glass is a ceramic.

If there are any stubborn dry erase marker smudges left over, a sharp #9 razor blade will easily remove them.

share|improve this answer
I do it all the time for calculations and software design, or to teach my kids math. Get high quality pens as it is harder to see than on a white board. If you really need to see it, use grease pens and some detergent and elbow grease for removal. – Peter DeWeese Jun 23 '11 at 2:05
If you have stubborn smudges, scribble over them with a fresh pen, and then quickly erase. This even works with permanent marker stains. – Alex Feinman Nov 12 '12 at 18:16
I do this w/ my bathroom mirror for "must not forget" items. – keshlam Jan 9 at 3:28
Dry-erase markers do work great! It's just that they're often not dark enough to see on the clear surface. It's actually finding a dark marker that's the hardest part. – rlb.usa Aug 14 at 16:44

Don't know about windows, but the shower backer board you can get in 4' x 8' sheets a most home improvement stores will work well too. Pretty much the same material and really cheap. We used these at a company I worked for previously and then cut and attached molding around them as a frame to dress them up. HTH.

share|improve this answer
Interesting. What did you use for the framing material? Painted wood would be an ink magnet. – BMitch Jun 23 '11 at 11:50
Did the same thing. $12 and a little liquid nails later and you got a nice, cheap whiteboard. Use a little simple green to clean it once in a while. – electricsauce Jun 24 '11 at 13:48

Window glass is an ideal surface on which to use dry erase markers. It is very non-porous and you don't want anything with pores that the ink can sink into.

A great way to get a whiteboard cheaply is to visit your local recycling plant and get yourself a glass door or window. If you want it to be white, paste paper behind it.

I use the Pomodoro system of time management, and for that I have a table which I fill in each day. I made the table on white paper, and covered it with clear Contact (the self adhesive stuff you get to cover school books). Then I painted it with car polish to fill all the pores.

I use Wrightmarkers markers for that. If you search for wrightmarkers markers you'll find details. Writing on windows needs particularly intense colors, and these meet the bill. If you have any difficulty at all cleaning them off, they are washable in plain water, so you can give your surface a quick wipe-down with a damp cloth. I also rinse my eraser every few weeks when the dust builds up in it.

Windows are not the only glass surface either. You can write names on wine-glasses before a party, or use blank CDs as place-mats with names written on them. You could even use the CDs for recording after you've erased the names, or re-use them for your next party.

share|improve this answer

Glass is great for writing on with markers. When I worked in a lab, we used to write on the fume hood sashes and glassware all thetime, with permanent markers, that way they wouldn't smudge. Erasing was as simple as wiping it with acetone, alcohol, or MEK, which, fortunately, were in plentiful supply in that lab, but can also be found at the hardware store. Actually, fingernail polish remover works great as well.

share|improve this answer
Bosisto's Eucalyptus Spray work's a treat and smells great. – user32513 Feb 7 at 10:18

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.