Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I'm installing an engineered hardwood product in my office, 5" Shaw Epic hardwood. It is tongue and groove, but not a click-lock type. For a floating installation, the tongues and grooves need to be glued together. There's a 20-second video of the installation at http://www.youtube.com/watch?v=Zkn_qtL8snw.

I have a bit of a time crunch (I want the floor in before the carpet guys come in a few days) and I'm not sure I can get ahold of any proper tongue and groove adhesive in time. The folks at local hardware stores I've asked look at me funny and say they haven't seen non-click-lock hardwood in 5 or 10 years.

Can I use regular wood glue for this, instead of tongue and groove adhesive? If not, is there another easy-to-obtain alternative?

It will be installed on foam underlay over OSB over dimpled foundation membrane over concrete in my basement, if that matters.

share|improve this question
up vote 5 down vote accepted

This looks like a simple white wood glue. That should be no problem here. Do NOT use a polyurethane wood glue here like Gorilla glue, as that will expand out and cause a mess, as well as possibly push the boards apart.

If you are unsure if it will work, try some white wood glue on a test piece. It will dry within an hour.

share|improve this answer
Thanks. For anyone wondering how far a bottle glue goes, I used about 1000ml for 350 linear ft of seam. – Matt Fox Jul 19 '11 at 5:00

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.