Take the 2-minute tour ×
Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. It's 100% free, no registration required.

I have this gate wood door that was painted. Apparently, they didn't use primer. The paint started pealing, so I thought I will strip the paint easily and stain the door (that way I don't need to ever deal with paint again).

So I got this paint scraperenter image description here and started going at it. but realized quickly, that it is indeed relatively easy and works well for flat, large surface.... but a huge problem when it comes to the lattice area, where there are plenty of corners (where one lattice crosses over the other).

HELP! anyone can recommend a better tool or method? for example, I saw some brushes, are they effective? and if so, which ones (I see 2 different metal color and stiffness).

enter image description here

share|improve this question
add comment

1 Answer 1

up vote 9 down vote accepted

Lattice is really cheap stuff. It's probably easier to just get new lattice and rebuild the gate. Or, for a simple fix, get a wire stripper wheel for a power drill and take at it. Get as much off that comes off easily and then cover it all with quality primer.

FYI, if a lot of the wood has been weathered for a while, it's going to be a chore to get primer to stick to it without a lot of sanding. Again, might be easier to replace the lattice al together. You can also usually find synthetic lattice that doesn't require any painting.

share|improve this answer
1  
+1 Replace it!. –  Tester101 Jun 2 '11 at 11:57
    
+1 for replacing. –  Chris Cudmore Jun 2 '11 at 13:15
    
Agree totally with replace it. Consider composite materials that do not need painting. They come in a variety of colors and are much easier to work with than wood. –  shirlock homes Jun 3 '11 at 11:49
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.