Take the 2-minute tour ×
Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. It's 100% free, no registration required.

I wanted to buy a drill, but some friends suggest I buy an electric screwdriver instead. They say you can use an electric screwdriver more than a drill, but I'm still unsure which to buy.

I think a drill would be more useful than an electric screwdriver.

Which would be more useful, if I could only purchase one or the other?

share|improve this question
1  
possible duplicate of Do I need a cordless screwdriver if I own a cordless drill? –  ChrisF Apr 15 '11 at 19:31
2  
Get one of each. –  shirlock homes Apr 15 '11 at 23:53

3 Answers 3

up vote 2 down vote accepted

The screwdrivers are designed to work at a much lower RPM which makes them much more controllable. They also have a lot more torque than the drill. I've used both and the difference is night and day. With the high torque of the screwdriver I have often driven screws into wood without predrilling at all.

Also the good screwdrivers have torque limiters that let you set the maximum torque--set the cutoff where you want it and when the screw is fully driven the limiter kicks in rather than snapping the head off the screw.

share|improve this answer
1  
Where are you getting the more torque numbers? This high torque screwdriver has 1/5 the torque rating of this drill. Were you thinking of an impact driver instead? Also, almost all electric drills have an adjustable clutch too. –  Doresoom Apr 15 '11 at 22:35
    
Agreed. I don't think you can buy a cordless drill without an adjustable clutch, and any decent one will have variable speed. I'd also say in my experience, 18 and 24V drills are miles ahead of the 14V ones. A decent cordless drill is a tool every homeowner should have. –  gregmac Apr 16 '11 at 4:52
    
@Doresoom: Of course the 14.4v unit is more powerful than the 7.2v one. Also, your "drill" appears to have the features of a cordless screwdriver. –  Loren Pechtel Apr 16 '11 at 22:31
    
Drill. Screwdriver. I'll just leave this here. –  Doresoom Apr 18 '11 at 3:00

I would think that a drill is more useful since you can attach any type of bit to it, including all types of screw drivers (star, flat, philips, etc), actual drill bits of various sizes, and other miscellaneous attachments.

(As an aside, I had a Black and Decker drill whose battery charger actually stopped working after 3 years or so. I recently bought a Ryobi and am hoping that it will last much longer.)

share|improve this answer

I have a Black and Decker 14 volt cordless drill that I use as both a drill and a screwdriver. I've had it for about 8 years now and it's been one of the most useful tools I've ever purchased. It is reversible and has adjustable speeds and torques. It came with an extra battery...I keep which-ever battery I'm not using on the charger at all times. There's nothing more useless than an electric drill/screwdriver with a dead battery!

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.