Take the 2-minute tour ×
Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. It's 100% free, no registration required.

I've recently replaced the thermostat in my fridge with a new unit with a much higher temperature range (this unit specifically).

The unit I took out had a ground connector & the original wiring had it connected. The new unit does not have a place for a ground connection, so I've not connected it.

Everything is running fine, but should I run the ground wire from the fridge somewhere? What could possibly go wrong?

share|improve this question
add comment

1 Answer 1

up vote 2 down vote accepted

If the new unit does not have a ground connection then it doesn't need one.

The ground wire was for the original thermostat so there should be no bad effects from not having it connected to anything. Any other component in the fridge that requires grounding will still be grounded through it's own wire.

Just make sure that you've insulated the end.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.