Take the 2-minute tour ×
Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. It's 100% free, no registration required.

I'm new to the realm of shrubbery trimming, though have gotten some good results already.

Now, however, I need to clean my pruning shears so they don't rust / get sticky.

What are good cleansers to use?

share|improve this question
add comment

3 Answers 3

up vote 2 down vote accepted

I use miracle fluid on mine. I'm referring to WD-40, of course. Protects from rust, lubricates, and cleans.

share|improve this answer
add comment

I use Simple Green all purpose cleaner on all our garden tools. Rinse with water, use simple green spray. Rinse again and then towel dry.

share|improve this answer
add comment

WD-40 can rust metal objects, it break down over time and turns into water through oxidation. I rusted out an axe this way.

I use Rem Oil with teflon, yes it is primarily a gun lubricant, but what better way to protect your pruners then with something made to work under extreme conditions. I've used it for all my lubrication applications, never has any adverse reactions and the lubrication lasts longer then traditional oil.

share|improve this answer
    
@alli9ndal - while I am also a fan of RemOil, WD-40 has never caused rusting in any use I have ever seen in >20 years of using it as a lubricant. –  warren Mar 18 '11 at 14:09
    
@warren spray something metal that has a case or similar and leave it for a week DON'T wipe off, just soak. –  allindal May 13 '11 at 0:31
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.