I'm working on designing the support frame for a deck for my backyard.
The basic shape of the deck:
It's essentially a square with one corner chopped off. The red line is the joist in question, the green lines are the remaining joists and the yellow(ish) lines are the stringers in between.
My question is how do I attach the red line joist to that corner joint? I'm pretty sure there are 45 degree angle joist hangers for the rest of the joists. Is this the best way to lay them out, or is there a better way to arrange the joists? The decking will be installed perpendicular to the joists, or parallel with that one chopped off angle. The joists are on 16" centers, measured off from either side of the red line joist. The drawing is oh so very not to scale :)