Take the 2-minute tour ×
Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. It's 100% free, no registration required.

How can I remove stains from concrete (garage/driveway)? The stains are most likely either oil, gasoline, or transmission fluid.

share|improve this question
3  
See diy.stackexchange.com/questions/1876/… (not the same staining agent, but...) –  ChrisF Feb 17 '11 at 16:34
4  

2 Answers 2

up vote 3 down vote accepted

There are lots of concrete cleaning products on the market, but I have had good luck with a 1 gallon solution of 1/4 bleach, 1 cup TSP and 3/4 water. Assuming you are talking about a driveway or garage floor, I would pressure wash the area first to get off the surface crud, then lay on some of the solution and let it set 5 mins or so. Scrub it down with a stiff broom and power wash again. Repeat this as necessary.
As a last resort, you can also use some muriatic acid, but test a small area first to be sure it doesn't effect the color too much.

share|improve this answer
    
TSP is a non-sudsing powdered Trisodium Phosphate compound that is formulated for heavy duty cleaning. (For anyone who had to look it up as well.) –  JYelton Jun 19 '11 at 20:58

If they are stains that just happened, i usually use sawdust or kitty litter. These soak it up nicely. If they have been there for a while, it may be too late.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.