Take the 2-minute tour ×
Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. It's 100% free, no registration required.

enter image description hereIn taking the cover off my closet dome light to change a lightbulb, I noticed that behind the lightbulb there is peeling tinfoil which is revealing something that looks like insulation. The lightbulbs (2) rest pretty close the tinfoil and the revealed insulation. Is this a fire hazard? Do i need to replace the tinfoil that's peeled away? Is there a max wattage of lightbulb I shouldn't be using?

share|improve this question
    
A photo might help illustrate what you're talking about. The maximum wattage bulb should be stamped, or printed on the fixture somewhere. –  Tester101 May 19 at 9:55

1 Answer 1

That is a reflective sheet to help use more of your bulbs' light output. So if you want the same sort of brightness as you had, yep, you do need to replace it. But for a closet, I personally wouldn't bother.

The maximum wattage should be stamped somewhere on the light. If in doubt, use LEDs or similar bulbs that don't push out as much heat as the equivalent CFL or incandescent.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.