Take the 2-minute tour ×
Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. It's 100% free, no registration required.

I've got a large hole behind my bathroom sink on the floor. Is there a easy but serious way to plug that hole, from which comes tremendous amounts of cold air?

enter image description here enter image description here enter image description here

share|improve this question
1  
Is there basement under there or crawlspace or slab? If possible, it'd be nice to prevent that space from getting cold, in addition to just plugging the hole. As is, you're losing heat thru your floor. –  Wayfaring Stranger Feb 13 at 15:03
add comment

2 Answers 2

Get a can of expandable foam from your hardware store. If they have it get the one for extra large gaps. Also pick up a tub of ready mixed tile grout. If the hole is really deep the foam may fall through before it had time to expand so you may need to stuff some newspapers into the hole to give the foam some thing to rest on until it had time to set up. Get as thick a layer of foam in there as possible for insulation.

After it has set, trim it off half an inch below floor level and trowel in the grout mixture level with the floor.

share|improve this answer
add comment

I'd use a fireblock foam, something like GREAT STUFF™ Fireblock Insulating Foam Sealant.

enter image description here

Not only will it stop drafts, but it will also help prevent the spread of fire through unblocked passages.

NOTE: There are other fireblock foams available, I simply used Great Stuff as an example because it is a well known brand.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.