Take the 2-minute tour ×
Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. It's 100% free, no registration required.

Here's a bit of an odd one for you. I have a length of rope I need to put one end into a hoop to support the weight of a boxing bag. The hoop cannot be "tied" though. I somehow need something like this: alt text

but stronger I think. Any suggestions?

EDIT: Something like this: but smaller :)

alt text

share|improve this question
    
Why can't the loop be tied? –  Peter Dec 11 '10 at 17:34
add comment

3 Answers

up vote 6 down vote accepted

You can make an eye splice

eye splice

Instructions on animatedknots.com and many other places.

share|improve this answer
    
+1 Splices like this, and even the bowline and figure 8 (or Flemish bend) are valuable tools that too few people seem to know anymore. –  user558 Dec 11 '10 at 14:11
    
looks great, thanks –  Keith Donegan Dec 12 '10 at 14:39
add comment

Yep ! definitely something like this I've used it myself. Here is a screenshot of what it looks like, you should be able to pick this up at any home improvement store. You make your loop and run the incoming and outgoing strands of rope on in the middle of the clamp and then use a hammer or vice to clamp the edges down on the rope. I was pulling heavier loads so I used two of them just for the sake of paraonia but it works like a charm and only cost a dollar or two.

share|improve this answer
add comment

If you need something that's easily removable / adjustable, there's the Figure 9 ... they make them in different sizes ... I have a few for dealing with tying down smaller cords.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.