Take the 2-minute tour ×
Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. It's 100% free, no registration required.

I am looking to install a folding clothesline that is bolted on the outer wall of the house.

To do that I will need to drill several holes into the brick wall, but as I have never drilled anything in my life, I am somewhat planning ahead for my mistakes.

If I was to make a mistake and drilled on a slight angle, is there a way to seal the hole and be able to re-drill on the same/similar spot?

share|improve this question
add comment

2 Answers

Unless you are considerably more than "on a slight angle", you are unlikely to have a problem. If you are slightly more out, the screw should still hold the clothesline, just the screw head won't sit as neat on the surface.

Take your time, let the drill do the work, and don't force it.

share|improve this answer
add comment

Measure twice, drill once? Rapid set mortar will get you out of trouble. Be sure you have a masonry anchor ready for after you drill.

share|improve this answer
    
I'm not worried about the positioning of the holes but the angle the hole was drilled. –  James Oct 29 '13 at 6:57
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.