Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

While finishing my door, I've noticed a lot of small air bubbles after applying the finish. I asked a painter about it and he told me it's normal, but it doesn't seem normal to me. Is this normal or should I hire some other person?

share|improve this question
up vote 7 down vote accepted

It can be a problem when drying conditions are too fast for the finish to release the bubbles. Here are some strategies to try.

  • Good quality brush, china bristle (boar) for oil
  • Slight thinning (up to 10%).
  • Drying extenders (retarders): Floetrol for latex, Penetrol for oil based paints and stains
  • Don't shake your finish, stir only (to prevent mixing air into finish).
  • "Tip off" slowly (lightly drag brush almost laying flat, no pressure) to integrate sections and even out finish.
  • HVLP spraying is within home user capability and pricing.
share|improve this answer
I'll add another tip: don't squeeze the brush along the rim of the can. Especially with foam brushes this can introduce a lot of air. To get excess finish off the brush just let it trip for a moment, or gently swing it against the insides of the can. – Henry Jackson Jul 20 '13 at 15:33

If you're using a varnish and a paintbrush it's fairly common. You can apply varnish or oil with a rag and that will cut down on the bubbles but they aren't a big issue most of the time.

share|improve this answer

I found that thinning was the key - had to experiment a little but once I got used to it the results where very good.I would go so far as to say that almost nothing can go from the can to the project some kind of thinning or cutting back on product is essential .

share|improve this answer

I find that the bubble almost always disappear during the drying process. Don't pop them.

share|improve this answer

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.