The service manual for a LG WM3677HW shows a very bad diagram... and I'm not very familiar with the parts to ID them.
The image above tells me to probe 3 components, and if out of spec replace them.
The dry heather resistance I can guess is the middle one (bulkier and solder instead of simpler connectors. the others two I need help.
Here's the picture of the actual part:
(image is huge! right click and View Image on new tab)
any clues about what is what?
Edit: Just went and measured all the 3 points. I hope the 1st one in the diagram is the middle one in the picture... then the other 2 would be open, resulting in no part needing replacement, right? ...regardless of what they are?