Take the 2-minute tour ×
Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. It's 100% free, no registration required.

My heavy equipment guy said we should put "3 inch minus" down on a new driveway. What is it, and is it a good choice?

share|improve this question
    
Related question: Definitons of various sand, gravel, and rock products –  Vebjorn Ljosa Nov 11 '10 at 15:16
add comment

3 Answers 3

up vote 5 down vote accepted

Interestingly, it seems that different localities tend to use different jargon for stone sizing, with not much standardization. There is no government agency that regulates it. :)

Regardless, since the sources of stone tend to use sieves with defined size holes to sort the stone, this tends to tell you the size of the stone to use. So around here, #3 stone means that which will fit through a sieve with 3 inch holes. In some cases, the stone will already have been run past smaller sieves.

I will suggest that stone with dirt in it will tend to support the growth of weeds, encourage tree roots more, etc. And since these stones tend to be more round, with few sharp edges, they don't really pack that well for a driveway base.

I have also seen that "crusher run" tends to pack very solidly. This is crushed limestone, run through the same sieves to size the stone. The sharp edges of crushed stone prevent things from sliding around, and the presence of smaller crushed stone fills in the interstices, locking things together even more. In fact, #3 crusher run seems to be a common base for driveways around here, with smaller sized crusher run on top as a surface. Our gravel driveway is made of exactly that.

So I would not be at all surprised if the heavy equipment guy was in fact referring to #3 crushed limestone for a base.

share|improve this answer
add comment

It means anything that will fit through a 3" x 3" screen grid, including large stones, smaller stones, all the way down to dust. It's something that would typically be used as a deep base to support a finer top layer of gravel.

share|improve this answer
add comment

A search of the internet reveals that it is "rocks, dirt and stones 3" and under." From the discussions I've found, it should only be used as a base at that size. 3/4" minus is the most recommended.

http://www.indianriverenterprises.com/4.html
http://www.pirate4x4.com/forum/showthread.php?t=682267

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.