Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. It's 100% free, no registration required.

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

My old heating element finally burned out and had to be replaced. That element is not made anymore, but an appliance store gave me the part # for a replacement that works for that oven. I took out the old one and when I went to install the new one I noticed there isn't a place to screw on the ground wire on the new part. There is another metal part that I might be able to connect it to on the element's base, but not being an electrician I just figured I would check if this was okay to do, or does it even need a ground connect on the newer element.

share|improve this question
    
All elements I've seen (not that many) achieve grounding via a retaining screw. If you can confirm continuity between the element casing and the oven chassis, an additional wire is possibly superfluous. Be sure the wire is not a grounding path through the element for something else though (seems unlikely, but one never knows). – bcworkz Apr 4 '13 at 19:43

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Browse other questions tagged or ask your own question.