Take the 2-minute tour ×
Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. It's 100% free, no registration required.

I have surround sound speakers with the speaker wires going up through the wall. The wire is fixed and doesn't slide in and out the wall.

Now it's time to tidy it up!

  • How much loose wire should I leave?
  • How can I tidy up the loose wire?

enter image description here enter image description here enter image description here
Click for larger view

share|improve this question
1  
Its too late now but you could have mounted the speaker so the wire passed through the hole in the mount. –  Craig Apr 3 '13 at 14:27
1  
@Craig maybe not.. pretty easy to fish the wire through there using a 12" piece of 14 ga solid wire or even piece of coat hanger.. just make a "c" with a radius that matches the 2 holes, tape the speaker wire on, pull back through. I little spackle or patching compound will make the hole disappear –  HerrBag Apr 3 '13 at 14:34
    
Even if the wires are fixed in the wall it is still possible to push the extra wire through the hole so that the slack bundle is in the wall instead of hanging on the outside. –  Michael Karas Apr 3 '13 at 15:03

2 Answers 2

up vote 1 down vote accepted

From the images I can see that you have space behind the speakers to hide them by rolling the wire and taping it. Hope this helps!

share|improve this answer

My first concern here is safety and code compliance. Ordinary speaker wire is not in-wall-rated.

You need to use CL2 or better, CMR rated cable for in wall use..

CL2R is short for Class 2 Riser Site detailing low voltage cable options

enter image description here Link to speaker wire

As far as neatness goes, installing a termination panel or a "brush" wall plate would help

enter image description here

Decora style insert which would mount to a low voltage old work ring enter image description here

share|improve this answer
    
wow, I'd never heard of a "brush" wall plate. great advice -- thanks. –  Craig HB Apr 3 '13 at 14:29
    
The brush wall plates are great. Alternatively you could get one that has speaker wire clamps to make the speaker easily detachable. –  Grant Apr 3 '13 at 22:10

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.