Take the 2-minute tour ×
Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. It's 100% free, no registration required.

This question already has an answer here:

I have used putty on the wall to fix the holes, and fill some gaps. the putty color is white while the rest of the wall is an older light green, I am painting a very dark yellow, However when painting the putty will give a darker color than the rest of the wall. how can I fix this?

share|improve this question
add comment

marked as duplicate by Niall C., ChrisF Mar 11 '13 at 23:37

This question has been asked before and already has an answer. If those answers do not fully address your question, please ask a new question.

1 Answer

up vote 2 down vote accepted

You should use a primer/sealer on the entire wall, before painting.

enter image description here

Or select a paint and primer combination.

enter image description here

Or simply apply multiple coats of paint over the entire wall.

share|improve this answer
2  
I've used the pictured paint and don't rate it as highly as separate primer/paint for stain/sheen blocking. I've used several other combo paint/primers and would give the class a 20-30% improvement over straight paint. –  HerrBag Mar 11 '13 at 13:23
    
@Tester101 - When you say apply multiple coats of paint, do you mean over the whole wall including the putty covered areas. or only the non putty covered areas?. thank –  Wahtever Mar 11 '13 at 13:44
    
@Wahtever Spot "priming" with wall color paint, perhaps several spot "primes" until sheens are similar, then cover entire wall. –  HerrBag Mar 11 '13 at 15:50
    
@HerrBag - That worked great, Thank you –  Wahtever Mar 11 '13 at 21:41
add comment

Not the answer you're looking for? Browse other questions tagged or ask your own question.