Take the 2-minute tour ×
Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. It's 100% free, no registration required.

Gas fireplace, pilot is off, push to ignite and it does but the flame comes on and it only stays lite for about 30 seconds and shuts down. I changed the batteries in the remote control. So not that.

share|improve this question
2  
Please provide more details: what name/type of fireplace, is RC built-in? What is your question? –  Peter Ivan Feb 23 '13 at 21:56

1 Answer 1

There should be a metal-wire looking thing that is the thermocouple. It must be in the path of the pilot and getting hot when its lit. The thermocouple must come up to temperature before you release the hold down for the pilot and turn it to "ON".

Usually, the thermocouple either works or doesn't. It can be bent slightly to put it more in line with the pilot.

Its not an expensive part, and a good DIY repair.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.