Take the 2-minute tour ×
Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. It's 100% free, no registration required.

Two sets of windows on the second floor of our house fall out, due to too much space between the window and frame area. It's tight enough at the corners of the frame area, but not in the middle. In fact, I'm able to pull both windows right out with little trouble.

Here are some photos:

enter image description here

enter image description here

enter image description here

enter image description here

I'd love to hear suggestions on how I'd be able to fix. Would I be able to take off the top white flashing material and add some wood/shims? Or is the best option to add smaller pieces of wood to the top of the windows themselves to extend them upward? As the window frame seems taller in the middle (that's the really loose area), I'm thinking adding some shim material to the frame under the white part might be best.

Do products exist out there, to help with this kind of scenario?

share|improve this question

2 Answers 2

up vote 4 down vote accepted

There doesn't appear to be too much holding them in at the best of times. Unless you want to replace the entire window you should look at getting the top and bottom sills (or whatever they're called where you are) straight. From your description I would say that there is a pretty significant difference in the opening when measured at the edges and the middle. That shouldn't be the case at all.

Remove the trim from at least the top and bottom of the window frame and shim the top and bottom as required until you have a nice even distance all the way across. Then replace the trim and touch up the paintwork as required.

share|improve this answer
1  
Thanks. I added shims on the bottom portion and the window now fits snug. It did bow in the middle. I didn't need to take anything off as the bottom white portion the window sits on lifted up enough to shim right off the bat. I then added some additional weather stripping. Maybe not the professional fix, but enough to work for this winter which is now here. –  MattB Nov 17 '10 at 4:14

I'd go to a big box store and get a good quality replacement window and replace the whole thing. It looks like a old replacement window that wasn't installed correctly.

share|improve this answer
    
Might also be able to remove this window and install it properly. –  Tester101 Nov 1 '10 at 16:24
1  
While all the parts seem to be present, the whole window does seem pretty flimsy. I don't think we're ready to replace the whole thing just yet, so a temporary fix will have to do for now. –  MattB Nov 17 '10 at 4:13

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.