Take the 2-minute tour ×
Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. It's 100% free, no registration required.

I will have hardwood on my first floor and carpet on the stairs and 2nd floor. My question is: regarding the transition, is it better to carpet the stairs first and then do the hardwood (as to avoid tucking the carpet in and risk making a mistake with the distance of hardwood to the first stair) or the other way around?

share|improve this question
    
If you do the carpet first, it might make it difficult to remove later when the carpet wears out (or goes out of style). –  Tester101 Feb 11 '13 at 19:08
    
can the carpet be cuffed where it meets the hardwoord so as to have a graceful transition? –  amphibient Feb 11 '13 at 19:09
add comment

1 Answer 1

Generally carpet is self edging,while hardwood floors are not (they usually gap from the wall a bit and call for a molding over the edge).

Install the floor and leave the gap at the first riser, without a molding, and bring the carpet down the riser and blind edge it. You can easily undo it in the future. This would allow you to replace the carpet, as Tester101 says, or to shift back to no carpet. Just add molding.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.