Take the 2-minute tour ×
Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. It's 100% free, no registration required.

I have a bath which has accumulated limescale inside the piping system; it manifests itself as a very-slow running tap with a weak stream. The tap itself is removable, and I suspect the limescale is inside the pipes just upstream of the taps. What's the best way to clean this out without taking the pipes apart? Vinegar?

share|improve this question

1 Answer 1

If the problem is scale sufficient to seriously reduce flow, you need a major solution and vinegar won't do.

There are acid treatments and reduced lime treatments, both very caustic chemicals that need to be handled by a pro. They are flushed through the whole system to dissolve the lime.

There is an electronic device being advertised that claims to break up the scale and put it back into solution to flush it out of the system. I have no experience with it and heard nothing about it, but it is a major installation.

The solution usually used for badly scaled pipes is replacement. Ferrous pipes seem to build up much faster than non ferrous, but there are problems mixing metals in a system. If you plan a partial replacement, you probably want to consider plastic piping such as PEX.

Most of the solutions offered on various sites focus on reducing buildup by softening water rather than curing the problem after it occurs. The added benefit of softened water is taste and easier rinsing of dishes and clothing.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.