Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. It's 100% free, no registration required.

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I am about to purchase a garbage disposal to install myself. Our kitchen sink has a large, deep side, and a small, shallower side. Which side is more appropriate to install the disposal in?

share|improve this question
2  
There is a significant advantage to installing the garbage disposal on the shallow side. This places the unit up higher under the sink and leaves more clearance under the disposal. – Michael Karas Jan 21 '13 at 14:48
    
I agree that the disposal, if you're going to have one, belongs on the wash side rather than the rinse side -- assuming you're doing a two-basin technique, which many people haven't learned or distrust for some reason. Personally I would probably be using the deep side of the sink as wash, but obviously others feel otherwise. Mine's two equal basins so the question hasn't arisen. – keshlam Aug 24 '15 at 17:54
up vote 8 down vote accepted

The small bowl is typically called a veggie bowl. The idea is that you use the large sink for cleaning dishes or soaking and then the other sink is available for prep usage, peeling etc.

share|improve this answer
    
and so if you use the small bowl for peeling, then you'd want the disposal on the small bowl? – user1663987 Jan 7 at 23:26

I've always seen the garbage disposal installed on the smaller bowl. I'm not aware of any official convention or rule that says which side should be used, that's just what I've noticed.

Garbage disposal on small bowl

share|improve this answer

I always install into the smaller bowl. (experienced but non-professional opinion)

If you think about it, the only thing that would prevent access to the disposal is a sink full of water. I'd rather have the larger bowl available to fill up with water and still allow access to the disposal. If the user wants one bowl of water and still use the disposal, it could be frustrating to have to fill the smaller bowl.

share|improve this answer

I would say that 90% of all sinks with 60/40 splits have the disposal located in the smaller of the two areas. It only makes sense. A lot of people say they want them on the side they wash dishes in. I would be willing to bet that when they have theirs installed on the wash side that eventually they will be rinsing on that side instead of washing. Again, it only makes sense to be able to use the disposal for that forgotten plate or leftovers that have been stored too long while doing dishes in the other sink.

share|improve this answer
1  
I agree with the rationale, but reach the opposite conclusion. Assuming one wants one of these monstrosities in the first place. – keshlam Aug 24 '15 at 22:25

I personally would install on the deeper side. Due to food particles from hand washing done in the sink flowing to the disposal and easier clean up. Just my opinion. Don't think there is a rule per se on which is correct or incorrect.

share|improve this answer

Personally, when I'm hand-washing things I use the semi-industrial approach of wash basin to rinse basin to drying rack. That works besg with two full-depth basins, and if the dring rack is on the right (as mine is) the right-hand basin is the rinse and left-handbasin is the wash. The wash basin is the one that will have almost all the food scraps in it, hence if you're going to have a disposal thst's the one which needs it most.

Others use other approaches, but my point is to consider what you're using each basin for and where the disposerable scraps will be.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.