Take the 2-minute tour ×
Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. It's 100% free, no registration required.

The pilot on my propane boiler won't stay lit for more than 30 minutes even after replacing the thermocouple and outside gas valves. The inside gas valve was replaced two years ago. Service people are stumped and it is cold! It is a Crown Boiler.

share|improve this question
add comment

1 Answer 1

If the thermocouple is new, and we assume that it's good, then I'd wonder if it's positioned correctly? I don't know how your boiler is, with some of them you can re-position the TC with respect to the pilot, and it might be too far away.

On a similar vein, are you sure it's locked in place and can't move? For instance, if it could vibrate around a bit, it might be moving too far away and therefore getting confused and cutting the gas.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.