Take the 2-minute tour ×
Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. It's 100% free, no registration required.

Is it possible to replace a ceiling fan speed controller with a switch? I just bought a house that had a ceiling fan with no light, which used a fan speed controller on the wall with different speeds. I added a light to the ceiling fan and would like to replace the fan controller with a light switch, that will turn both the light and the fan on. You would have to control each with the chains that hang from the fan. I replaced the fan controller with a light switch and it didn't work. Does it need to be connected differently? I only connected the 2 black wires and the ground. It is a one pole switch.

share|improve this question
    
There is 2 wiree in the box is 14-2. (one is hot) –  KLR Jan 5 '13 at 23:31
add comment

2 Answers 2

Sure you can do this. The fan speed controller should have 2 terminals, swap it with a single pole switch. If it's a digital controller it might also have a neutral - just put a wire nut over it and only connect the switch between the hot wires.

share|improve this answer
add comment

Have you considered a wireless remote? Replace the fan speed controller with a switch. Install the remote contoller between the fan and the and the ceiling box. A handheld battery remote controls fanspeed and lights with dimming They have them at most home centers. They cost about $35.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.