Take the 2-minute tour ×
Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. It's 100% free, no registration required.

If a dimmer switch is fitted for the room but we get non-dimmable LED lamps (GU10), I know there may be flickering problems with dimming, but will they work fine if the dimmer is turned to max?

share|improve this question
5  
Probably, but I would be concerned that the dimmer could be accidentally turned down, damaging the lamp. It'd be worth putting in a simple $2 switch to protect a $20 lamp. –  bcworkz Dec 30 '12 at 0:48

1 Answer 1

Yes, LED bulbs typically work fine on dimmers set to max. In my experience, even the "non-dimmable" ones don't seem to be harmed when dimmed although your mileage here may vary with bulb and dimmer models.

This seems to be a big improvement in comparison with "non-dimmable" CFLs, which seem to be very susceptible to destruction - I have destroyed several after just seconds of dimming.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.