Take the 2-minute tour ×
Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. It's 100% free, no registration required.

How do I choose between a chrome-coated (nice and shiny) and an oxidation-treated (dark oxidized surface) tool, all else being equal - same steel, same design, same handles, just one has its metal parts chrome-coated and the other has its metal parts oxidized.

How do I make a choice?

share|improve this question
    
Chrome coating seems to me to be more durable, but I can't say for certain. –  Eli Iser Dec 25 '12 at 15:28
add comment

3 Answers 3

IN MY EXPERIENCE: Chrome resists rust better. But does sometimes chip, and is vulnerable to rust at those points. Chrome is generally easier to read the markings. Polished chrome can be slipperier when greasy. (Not matte chrome)

Black oxide resists rust generally fine for my purposes. It looks better when it's greasy, (It doesn't show the grease as bad, since grease is almost black). It can occasionally be a challenge to read the markings, depending on the circumstances. It's not as slippery as polished chrome.

As the user, you pick which benefits/problems you'd rather have.

I personally don't really care that much. I have some of each. All things being equal, I'd choose matte chrome, then black oxide. Polished chrome last.

share|improve this answer
add comment

I prefer the oxide coating. The chrome tends to chip on the highest stress points. At least in my opinion the chrome is more slippery when wet than the oxide coating. Plus impact sockets are black, so black sockets and wrenches look tougher right.

share|improve this answer
add comment

I prefer chrome, because I expect it to give better rust protection. I think chipped chrome is a sign of defective plating and/or poor heat treatment of the underlying steel (not properly hardened). I would expect the chrome plated tool to be more expensive. If both price and features were the same, I would suspect they'd taken shortcuts with the chrome plated tool, and would buy the black oxide treated tool instead.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.