Take the 2-minute tour ×
Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. It's 100% free, no registration required.

What designs of lights are allowed?

When do I need to get a building regulation inspection?

share|improve this question

1 Answer 1

up vote 1 down vote accepted

Depends on the distance from water. Homebase, of all people, have a good guide here.

In summary, lights in the bath must be 12V and completely waterproof (zone 0). If it's in reach of a bath (standing up or sitting down) your choices are limited to completely waterproof sealed units (rated IPX4) and you'll need a 30mA RCD (zone 1). Other areas at risk of splashing (Zone 3, including above sinks) need IPX4 splash-resistant fittings but don't need the RCD. Outside of that - in zone 3 - anything will do.

You may need to have the completed work inspected under Part P of the buildings regulations. Give buildings control at your local council a call - they can advise.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.