Take the 2-minute tour ×
Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. It's 100% free, no registration required.

The Thermador CT227N and CT227NW oven have a non-discoverable interface for setting the clock time, what is the hidden method to set the time?

share|improve this question
When down voting a question, please suggest how a question might be improved, so we can improve the site. –  WilliamKF Dec 22 '12 at 1:39
This isn't really a home improvement question. It is very localised to one product that is an electrical appliance, and it is easily found by a simple google search or by reading the manual. –  Rory Alsop Dec 22 '12 at 10:00
Operation of appliances is off-topic; see the faq (last bullet point). –  Niall C. Dec 22 '12 at 15:59
I down voted and voted to close because it is a question about a very specific model of an oven and is something that would likely be found in the manual. It is unlikely to help anyone else in the future. –  Steven Dec 29 '12 at 7:40
@Steven Thanks for posting your feedback, note that the other question on setting clock was upvoted to 4 and still open, I suggest closing it too since I checked and saw another clock question and on its precedent I posted this one. diy.stackexchange.com/questions/10089/… –  WilliamKF Dec 29 '12 at 18:26
add comment

closed as off topic by Niall C., Steven, Tester101 Dec 26 '12 at 12:55

Questions on Home Improvement Stack Exchange are expected to relate to home improvement within the scope defined by the community. Consider editing the question or leaving comments for improvement if you believe the question can be reworded to fit within the scope. Read more about reopening questions here.If this question can be reworded to fit the rules in the help center, please edit the question.

1 Answer

up vote 1 down vote accepted

Below the clock LED display is a large round knob. Rotate the knob counter clockwise a couple of whole turns until you hear a beep and the word time appears on the display, once you hear the beep, you are setting the time by rotating it clockwise or counter-clockwise to adjust the time shown on the LED display.

When you reach the desired time, press the start button and the clock time is now set to the new time. You will hear a beep and the word time will disappear from the LED display.

share|improve this answer
add comment

Not the answer you're looking for? Browse other questions tagged or ask your own question.