Take the 2-minute tour ×
Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. It's 100% free, no registration required.

We're redoing our front room in our house. We're thinking of going with a 'seaside cottage' feel and installing some wainscoting on the walls about 2/3rds the way up.

The catch is that our house currently has doors with casings, but the windows are using a finished sheetrock return. They do have a stool, but not casings around the outside.

Is there a typical way to handle finishing wainscoting around a caseless window short of tearing out all the sheetrock and actually fully framing the windows?

I had two ideas:

  1. Bring the wainscoting up around the windows but stop short 1" or so to the corner. Allow the sheetrock to be exposed around the window.

  2. Do the same, but extend the wainscoting right to the corner, and then apply a small (easily removable) trim piece to cover the outside corner around the window.

Has anyone done/seen that type of finish detail? Any other typical solutions for this?

share|improve this question
Can you post a pic of the window returns? There are many ways to trim out a window. How thick is your wainscoting? Is it solid wood or a composite? Need a bit more info to give you a workable answer. –  shirlock homes Dec 8 '12 at 11:31
I like choice #2. –  DMoore May 8 '13 at 6:21

2 Answers 2



It appears to be just a matter of how you trim it out. You can do something detailed like in the photo or as simple as 1/4 round trim to cover the edge.

share|improve this answer
That's the question, I suppose: how do folks typically trim it out (or maybe there is no typical answer?) –  DA01 Dec 7 '12 at 20:03
BTW, I love houzz too. Alas, I haven't been able to find a picture of both wainscoting and casing-less windows yet. So, maybe it is rather atypical. I guess that makes sense as sheetrock returns are all about less ornamentation while wainscoting tends to be about more ornamentation. –  DA01 Dec 7 '12 at 20:06
True, also rockers are cheaper than finish carpenters. I would focus on carrying the theme of whatever cap treatment you're using down the side of the opening and tying in the stool somehow. I'm inclined to flush it with the return rather than carrying around the corner. A coat or two of mud would be used so it flushes out perfectly. –  bcworkz Jan 6 '13 at 22:28

I didn't have pics of how I did the window area but here is pic which shows one method of edging: I would make an apron for under the window sill and for beside the window - experiment with widths that look good for the particular style of wainscot you are using. If it is stain grade wainscot - you should be able to pick up stock to make it out of. wainscot trim

share|improve this answer

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.