Take the 2-minute tour ×
Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. It's 100% free, no registration required.

I have a mostly-finished basement, with the furnace in a utility room off the main room. I feel the condensate pump is noisy, but this is my first heater with one, so I'm not sure if its normal dB or not.

Normally, we're not down there much, so we don't mind the noise (you still can hear it, muffled, throughout the house). But with holidays coming up and guests over, we'd like to quiet it some.

Is there any way to either minimize its action, or quiet it, or both?

share|improve this question

1 Answer 1

My furnace controller has an "accessory" terminal that carries 120VAC whenever the blower is on. I wired a receptacle to this terminal so that noisy accessories (namely a drum humidifier and a condensate pump) only come on when the blower is on. My blower is loud enough to mask the sounds of the accessories. Maybe yours is, too.

share|improve this answer
    
Thank you. This may help remove some noise, but i'd prefer an overall reduction, not just when the blower is on. –  Rich Homolka Dec 5 '12 at 21:10
    
If it's very noisy because it's old, you might consider just replacing it. Mine cost about $50. –  ArgentoSapiens Dec 5 '12 at 23:15

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.