I'm trying to install a new light fixture in the front hall. Currently, the light is activated by 2 switches (on each end of hall). The NEW fixture has 1 black wire and 1 white wire. The ceiling wires have 2 black and 2 white coming down. The OLD single light has the 2 wires connected separately by a little metal tab.
I tried connecting the 3 black and 3 white together and attached the metal ground to the green screw. It kept on switching the breaker when I went to turn it back on.
How do I connect this light so I can still use all switches? Again, 2 black and 2 white in ceiling, 2 switches, new light has 1 black, 1 white, and 1 ground.