Take the 2-minute tour ×
Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. It's 100% free, no registration required.

I have a free standing range electrical stove and one of the burners stays on all the time even if I turn it off.

Can someone give me some ideas on how to fix this?

share|improve this question
1  
The switch/heat control must have worn out or become damaged, such as contacts fusing together. It needs to be replaced. –  bcworkz Nov 23 '12 at 23:22
add comment

1 Answer

I'll bet the control switch is broken. This is not a difficult fix, but usually requires lifting the range top to access the wiring harness and install a new switch. Most appliance stores with a service department will also sell the parts. If your range is a new solid state computer controlled, you may have a bad control board. If that is the case, the parts are expensive and should be done by a tech. they are very hard for a consumer to trouble shoot.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.