Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. Join them; it only takes a minute:

Sign up
Here's how it works:
  1. Anybody can ask a question
  2. Anybody can answer
  3. The best answers are voted up and rise to the top

I have a large paved area that I would like to replace with lawn. My plan is to use some of the pavers as a border.

They're plain concrete pavers (450x450mm) that look like this except about 20 years old: Boring pavers

I was thinking about painting them a nice cream colour.

Has anyone ever done anything like this?

Will the colour fade or chip?

Is there anything I should know about painting ground cover?

share|improve this question

Rather than using paint, look at some of the dozens of dry concrete dyes. There are several methods to color concrete after it has cured. Acid wash is very effective. Check out this web site: http://www.concretenetwork.com/concrete/walkways/existingdecorativeconcretewalkways.html

There are also several other sites you can look at including Lowes, HD, and Sherwin Williams.

Concrete floor paints are easy and quick, but may require more maintenance and refinishing over time as compared to a stains. If your area is small and not subject to lots of traffic, paint may be a good choice.

share|improve this answer
up vote 0 down vote accepted

It turns out they make special paving paint. It's hard wearing and scuff resistant.

Here is an example.

Here is a video on applying paving paint.

The really import part is cleaning your pavers. The video goes into great detail about using etching solution to clean the concrete before painting. They also clean with sugar soap.

share|improve this answer

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.