Take the 2-minute tour ×
Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. It's 100% free, no registration required.

I have a small holiday apartment in Europe that has pre-fabricated concrete walls. The surfaces are relatively smooth but I want to prepare them for painting by applying a skim coat of plaster. Which kind of plaster is the most appropriate for this purpose.

By the way, these are internal walls.

share|improve this question
add comment

2 Answers

up vote 1 down vote accepted

Any top coat plaster should be OK.

It might be worth priming the surface with a diluted PVA solution (5 parts water to 1 part PVA - from memory so double check) to seal it.

share|improve this answer
add comment

Is it possible to just seal the wall, prime it, and then paint (maybe using a thick nap roller) avoiding have to put down any plaster? After you have sealed and primed the wall, a coat (or two) of paint with a thick nap roller might be able to smooth out any small defects in the pre-fabricated wall. And painting is going to be much easier than putting plaster down. (Of course patch any major defects in the wall prior to sealing it.)

share|improve this answer
1  
I agree, priming (maybe putting down UGL drylok to help with any possible moisture issues) would be a much better idea than plastering. –  Scott Vercuski Sep 14 '10 at 13:39
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.