Take the 2-minute tour ×
Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. It's 100% free, no registration required.

I just saw these for the first time today at Lowe's:

alt text

The advantages I can see over the crimp style are:

  1. A single tool can work with multiple PEX sizes
  2. That single tool is cheaper than a single-size crimp tool (~$40 vs ~$80)
  3. The tool grabs and pinches the raised segment of the clamp, so it doesn't need to wrap around the tube which should make it easier to use in confined spaces

Has anyone used this type of ring for PEX work and have any thoughts on them?

share|improve this question
add comment

7 Answers 7

up vote 4 down vote accepted

The benefits of the clamps are exactly as you say - the biggest one being that they're sometimes the only option in a cramped area. They used to be over 5x the price of the rings, which adds up very quickly -- but I see now they are only slightly more expensive.

I don't think they're any less reliable than regular pex crimps, I know of some (at my cottage) that have been fine for 5+ years now.

share|improve this answer
add comment

I picked up one of these yesterday and it works great. No problem getting it in between my floor joists, and it doesn't appear to be as finicky about keeping the tool exactly perpendicular to the tubing.

As for the different style bands, I'll update here if they start leaking. :)

share|improve this answer
add comment

I agree with all three of your points regarding the pinch ring. I chose to use the pinch ring style to modify some of the work that the previous owner did in our place and had no problems after over a year of them being in place.

share|improve this answer
    
Good to hear -- thanks! –  Mike Powell Sep 13 '10 at 15:53
add comment

I just did a remodel, and ended up using PEX clamps. Got the clamps and what-nots at Home Depot. The clamp tool can be a bit of a challenge to use between floor joists, and I did indeed have to do just this in a rather awkward angle, but it worked great. Due to other issues, I had to undo a connection at one point, and peeling the clamp apart wasn't too difficult.

Being able to use the same tool for both 1/2" and 3/4" made it a wise investment. The clamp tool itself auto-releases when the clamp is fully seated, so you don't need to be a plumbing pro to use it.

share|improve this answer
add comment

The stainless steel Cinch Clamps are stronger than the copper Crimp Rings. I know this from personal experience after working with frozen water lines. When the fitted connection freezes with water in the line it will cause the copper Crimp Ring to expand just enough to cause a leak when it thaws. The stronger stainless steel did not expand in a recent test. However, you cannot use the poly tees and elbows with Cinch Clamps.

share|improve this answer
add comment

I purchased this type of tool and rings originaly because they didn't have the other tool in stock and I had a job to do. I have noticed several things that I like better since I have now used both. I can visually tell if the pinch rings have been pinched whereas the other style you have to feel it or look closely and in dim light that can be difficult. I have seen many jobs where somebody missed crimping one fitting b4 the water got turned on. I also recently noticed they use them to attach the fuel nozel to the hose at the gas station. The single tool for multiple sizes is also a plus. I'm looking for the racheting pinch ring tool. A coworker of mine had one and it was awsome in cramped spaces.

share|improve this answer
add comment

I have strong reservations about the integrity of both types. I have two leaks after 8 years of service with the stainless steel clamps. My colleague at work has had three leaks in as many months, one causing extensive damage and mold abatement for which the insurance folks are required to make you leave and stay in a hotel room (with 4 boys). Both homes are relatively new 6-8 years service and in the same water system.

I found out that the tools are supposed to be calibrated every 30 connectors but usually are not.

My clamps seem to lose compression over time and I have one slow leak and one leak around the circumferential space between fitting and tubing. My colleague had complete parting of the band so that the leak was open ended flow after the PEX slipped off the fitting.

Mine seem to be under clamped as a result of tool wear. My friend's may have been over tightened by a tool adjusted too tightly.

Three engineers on my floor at work are seriously considering what it would take to replace their entire house full of these clamps. You have about two minutes from leak initiation to serious damage. I am totally thankful we were home, but have little confidence in this product.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.