How do I rehang a wooden door with worn screw holes?
I just moved into this room and the door wasn't closing properly, so I took the door off, screwed the hinges in properly and tried to screw the door on more straightly than before, so it would close nicely.
But to my horror, the door is now closing even worse. Now I have to hold the handle and push it (and the door) upwards to make it close at all.
The problem is that the door is leaning down, creating a gap at the top and no room at all at the bottom. I hope I'm explaining this properly. Also the hinges can't be screwed in very well, the screws turn on themselves after being screwed in.
Is there any way I can fix this?