Take the 2-minute tour ×
Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. It's 100% free, no registration required.

I have a Price-Pfister 533 Genesis single handled kitchen faucet that turns itself off. It is impossible to run water at a low volume because the moment your hand is off the handle it shuts off.

How can I fix this?

share|improve this question
add comment

1 Answer

up vote 8 down vote accepted

Pfister is so aware of this problem they have a video on the problem http://www.pfisterfaucets.com/about/falling_handle.aspx

Turns out they made a faucets with heavy metal handles but cheap plastic internal parts... after a few years they fail. I called up customer service, identified myself as an original owner, gave an approximate date of purchase, and was sent new parts.

They sent me a new metal nut, Pfister part 941-7110 . Then, they sent a new chromed plastic handle that has less mass.

share|improve this answer
1  
+1, perfect fix, I actually have the same problem with one, so I'm gonna take your advise. thanks. –  shirlock homes Jul 27 '12 at 11:22
1  
you must state that you are the original buyer of the part. They said they are sending a new cartridge that holds the handle. –  user12492 Apr 11 '13 at 15:15
    
I have had to replace the cartridge twice since 2008. Each time PP has sent a replacement cartridge and brass nut. –  bill Feb 23 at 14:44
    
After the third round, PP sent me an entirely new faucet. Sadly, a cheap Phirst model, that quite frankly is not built to the standard of the original. –  Bryce Feb 25 at 0:02
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.