Take the 2-minute tour ×
Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. It's 100% free, no registration required.

We have this rack of towel hooks in our bathroom, but the hooks are so smooth that the towels easily fall off.

enter image description here

How can I alter it so that the towels don't fall off?

I'd rather not roughen up the wood, as it may pull thread out of the towels. Perhaps there's some sort of rubbery coating I could paint on to the top of each hook?

share|improve this question
    
Sugru, if you have it. Black tape maybe? –  iambriansreed Jun 16 '12 at 23:48
add comment

6 Answers

up vote 7 down vote accepted

There's a product called Plasti-Dip that used to be carried at Harbor Frieght along with most hardware stores. I was a liquid vinyl used for coating tool handles. It dries to a soft grippy texture and comes in colors.

share|improve this answer
    
Inspired by your answer, I used some white silicone sealant that I already happened to have. Seems to do the trick! Thanks! –  Highly Irregular Jul 4 '12 at 19:22
add comment

Find more twine or rope (looks like a natural sisal) that matches the "laces" on the shoes. Wrap the twine around the posts in a spiral until they are completely covered. You will probably need to glue the twine occasionally, and perhaps rough up the paint so the glue sticks.

The twine in the picture looks like it is waxed. I would make sure to use non-waxed if you are going to wrap the posts, otherwise the towels would still probably slip right off.

share|improve this answer
add comment

Cheap fix: Get a heavy, wide rubber band and wrap it around the middle of the ball.

share|improve this answer
add comment

A dab of Sugru, rubber compound you can buy on internet.

share|improve this answer
add comment

300 grit sandpaper will remove the polish from those knobs. If you're even moderately careful of how hard you rub, it won't wreck the paint either.

share|improve this answer
add comment

You can get towels to stay on even very smooth knobs. Drape the towel over the knob and then twist the ends half a turn.

Or, repaint the hanger using a satin (non-gloss) white paint.

Or, loosen the screws and shim the bottom of it to make the knobs point at a slight upward angle.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.