Take the 2-minute tour ×
Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. It's 100% free, no registration required.

A large amount of bleach was spilled on our carpet, and I'm wondering how we can try to restore the color. The carpet is a light tan color.

share|improve this question
2  
Bleach (mostly) doesn't stain, it does the opposite -- removing stains and dyes. –  Matthew Read Jul 12 '11 at 18:08
add comment

1 Answer 1

Your carpet is now light tan, or used to be light tan?

Either way, the only thing I know of is to try to dye it back, and odds are, you're either going to dye more than you wanted (darkening the edges) or miss the edge ... either way, it's going to miss, and won't be 100% restored.

I'd consider rearranging the furniture (ie, hide it with a couch), or put a throw rug overtop if it's in the middle of the floor.

If it's in an area that's prone to issues, you can always replace just a section of the carpet with some other material -- at my mom's house we put some hardwood down just inside the back door where the cats liked trying to dig their way under a door, rather than replace the whole room.

share|improve this answer
    
What kind of dye would you suggest trying? –  Shane Fulmer Aug 28 '10 at 14:43
    
@Shane : you'd have to use a dye that's compatable with your material. Odds are, it's wool, nylon, or polyester if it's wall-to-wall. If it's nylon, you may need to lower the pH ('acid dye') the carpet. I don't know if you can dye polyester. –  Joe Aug 29 '10 at 0:39
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.