Take the 2-minute tour ×
Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. It's 100% free, no registration required.

I just replaced the drum rollers on my Asko T701 electric clothes dryer. As I was removing the front frame to access the rollers, this metal part fell out (the Sharpie is just there for scale):

Metal piece

I don't know what it is. I put the dryer back together and it seems to run fine, but obviously I'd like to figure out what this part is and where to reinstall it. I didn't see exactly where it fell from but it fell into the dryer drum, so I'm figuring it came from the top edge of the front panel (somewhere around this diamond-shaped hole or below it):

enter image description here

It has no markings or text of any kind on it, and no holes for screws or anything. It doesn't appear in any of the exploded diagrams or parts lists for this dryer that I've been able to find:

http://www.searspartsdirect.com/partsdirect/part-model/Asko-Parts/Dryer-Parts/Model-T701/3365/0151200/P0907020/00005

http://www.greatplainsapplianceparts.com/order/Parts%20Manuals/Asko/ASKO-Dryer/T701%20(TD11A)%20WH%20REV.A.pdf

I also have the service manual for this model and this piece isn't mentioned in the section on removing the front panel (or anywhere else in the manual, as far as I can tell).

share|improve this question
    
If it works without it, I'd call it a "spare" part. –  Tester101 May 24 '12 at 16:43
    
You may be right, I've been running the dryer without this part for a month now and it seems to be running fine. –  Dan C Jun 21 '12 at 19:41
add comment

1 Answer

This part is called a Door Switch Guard.

share|improve this answer
    
Can you provide any evidence to back up this claim? –  Tester101 Jan 28 at 12:59
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.