Take the 2-minute tour ×
Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. It's 100% free, no registration required.

We have a really old toilet in one of our bathrooms which has started to leak around the tank bolts. I was going to replace the bolts and washers but the nuts are completely seized and rusted to the bolts. Due to placement I can only get about a 1" draw on a hack saw (which doesn't really cut well) so I can't easily cut them that way.

How can these be removed without shattering the tank?

share|improve this question
add comment

3 Answers

up vote 9 down vote accepted

I would try a Dremel type tool with an abrasive cutoff wheel. Of course you need to be careful of the porcelain. I've cut many screws and bolts this way.

If you can't cut the bolt, you may be able to cut the nut, in the direction of the bolt's axis, then pry the nut apart at the cut line.

share|improve this answer
add comment

I recommend an old-fashioned mechanic's nutcracker. Search the net for "mechanics' nutcracker tool", AKA "Mechanics' Nut Splitter". Many tool vendors make these. These will split a seized nut across the flats, by hand tightening a screw that drives a hardened wedge gizmo. Works in places not accessible to other tools, like saws or grinders. It will destroy the nut, but sometimes releases the bolt without inflicting additional damage on the seized threads.

Then, if possible, replace with new nuts and bolts of solid brass or stainless steel. The additional cost is trivial. However, it is not easy to find solid brass or stainless steel bolts, to fit toilets. It's a mystery to me, why toilet manufacturers continue to install and sell replacement hardware made of steel that is only brass PLATED, which will eventually rust up, leak, and seize. Possibly, to create work for plumbers. More likely, to sell more new toilets, when perfectly good but leaky toilets get broken in efforts to remove corroded bolts with hammer blows, hacksaws, electric vibrating saws, or electric grinding wheels. Doze strategies are just too risky!

First, try an old-fashioned mechanic's nutcracker

share|improve this answer
add comment

A great tool for this purpose and any similar close work is a ultrasonic multitool such as a Fein, Rockwell etc. Lots of tool companies are making them now. the other tool would be a hacksaw blade holder. It is not a full framed hacksaw, rather a handle that holds the blade and can get into tight places. Remember, save yourself a lot of frustration and use a good quality sharp blade, not a dime store, discount blade.

http://www.toolsofthetrade.net/industry-news.asp?articleID=1495690&sectionID=1493

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.