Take the 2-minute tour ×
Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. It's 100% free, no registration required.

I am not asking how high to mount the shower curtain rod (that is easy to determine from an existing shower curtain). I am trying to figure out how far "into" the tub it should be mounted. I want the curtain to not be in the way when showering but still have the bottom edge inside the tub.

I see a few possibilities, what the pros and cons of the following options:

  • Line it up with the inside of the tub but that seems like it will be prone to "billowing in" when showering.
  • I could line it up over the outside edge of tub.
  • Center it over the tub curb.
  • Put it "outside" of the tub completely
share|improve this question
3  
This is purely an aesthetics question. –  The Evil Greebo Feb 14 '12 at 16:28
1  
Shouldn't there be a standard practice though? –  Doresoom Feb 14 '12 at 20:51
    
Why? Its aesthetic. –  The Evil Greebo Feb 14 '12 at 21:11
    
I would at least like to know where most people have their rods mounted. I will be mounting this through a tempered glass panel so I need to tell the glass company where to cut the hole before it goes in. I cannot just eyeball it when the time comes to mount it. If you think there is no "right" answer maybe make it a community-wiki, I just want to know what other people do in thsi situation. –  auujay Feb 14 '12 at 23:00
add comment

closed as not constructive by The Evil Greebo, Karl Katzke, ChrisF Feb 18 '12 at 13:30

As it currently stands, this question is not a good fit for our Q&A format. We expect answers to be supported by facts, references, or expertise, but this question will likely solicit debate, arguments, polling, or extended discussion. If you feel that this question can be improved and possibly reopened, visit the help center for guidance.If this question can be reworded to fit the rules in the help center, please edit the question.

2 Answers

My preference is to line it up with either the outside edge or center of the tub so any decorative curtain outside the shower hangs nicely. The waterproof curtain on the inside can just be draped over the inside edge of the tub, and this gives you more space in the shower.

share|improve this answer
add comment

I always position it over the outside edge of the bath, or an inch further out. You can then place a single layer shower curtain inside the tub easily, and if you do have an outer layer, as @BMitch says, it will hang without any bumps.

share|improve this answer
add comment

Not the answer you're looking for? Browse other questions tagged or ask your own question.