Take the 2-minute tour ×
Home Improvement Stack Exchange is a question and answer site for contractors and serious DIYers. It's 100% free, no registration required.

My question is very similar to "How can I fit a door in a frame that is too small?" except my house is made of concrete block. I bought a used patio French door to replace my sliding door. The sliding door measured 71 1/2 x 80. The French doors measured the same. After taking out the frame for the sliders, I need at least 1/2 inch on the top and sides. Help!

share|improve this question
    
Wait... Is the frame a 1/2" too large, or is the door 1/2" too large? Is it a 1/2" on each side, or 1/4" on each side for a total of 1/2"? –  Tester101 Jan 26 '12 at 12:49
    
The opening is too small for the door and frame. 1/4" on both sides. The door is an exterior door so it is made of steel. I believe my only option is to buy new doors :( –  Kim Jan 27 '12 at 0:00
add comment

1 Answer

It depends on the construction of the door, but if it's a wood door, you should be able to take off 1/4" from the top and bottom without any problem.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.